A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
CAUTION!
Make sure that no sealant residue enters the engine.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Clean old sealant from holes - arrow - in cylinder head gaskets.
‹› With the cylinder head installed only half of the holes in the cylinder head gasket are visible.
CAUTION!
Cylinder head gasket must not be kinked. A kinked cylinder head gasket must be replaced.
-
Bend ends of the cylinder head gaskets very slightly downward - arrows - until upper sealing surface of the gasket and cylinder head can be
cleaned.