A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1001008.png)
‹› The groove of sealing surface must be completely filled with sealant.
‹› Sealant beads must be 1.5 to 2.0 mm above sealing surface.
‹› The sealant bead - 3 - must be pulled through as shown in the illustration even though the groove is intermittent.
-
Lay O-ring - arrow - in lower timing chain cover groove.
-
Secure O-ring with some sealant.
-
Set lower timing chain cover in place, guiding the cover at an angle from below onto sealing surface of the cylinder block and cylinder head.