A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1092003.png)
-
Remove air filter housing.
-
Free up electrical wiring harness for generator and starter at the longitudinal member.
-
Disconnect electrical harness connector - arrow - at Camshaft Position (CMP) Sensor 3 (G300).
-
Free up electrical wiring.
-
Disconnect electrical harness connector - 1 - for Heated Oxygen Sensor (HO2S) (G39) and free up wire.
‹› Ignore - 2 -.
-
Remove bolts - 2 - and - 3 -, which are accessible from above, and remove heat shield.
