A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1092005.png)
1. Pre-tighten to 15 Nm.
2. Tighten to 25 Nm.
-
Install right front exhaust pipe with catalytic converter. Refer to: Vehicles with manual transmission => [ Right Front Exhaust Pipe with Catalytic
Converter ] See: Catalytic Converter/Service and Repair/Right Front Exhaust Pipe With Catalytic Converter, vehicles with automatic transmission
=> [ Right Front Exhaust Pipe with Catalytic Converter ] See: Catalytic Converter/Service and Repair/Right Front Exhaust Pipe With Catalytic
Converter.
-
Align exhaust system free of tension. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust
System, Installing.
Tightening Specifications
