A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-3272003.png)
-
Attach bracket - D - via tab - B -.
-
Install screws - A - and tighten (tightening torque of 8 Nm).
-
Replace O-ring seals - D -.
-
Rotate the reservoir so that both refrigerant lines - B - and - C - can be installed in the reservoir without tension. In doing so, pay attention to
correct assignment of connections.
-
Attach the refrigerant line with screw - A - to the reservoir (tightening torque 10 Nm for screws with thread M6 and 25 Nm for screws with thread
M8). Secure the reservoir against rotation with an oil filter band for example.
-
Tighten screw - C - (tightening torque of 8 Nm).
