A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Center Mounted Brake Lamp: Description and Operation
High-Mount Brake Lamp
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Removing
-
Remove rear lid trim.
-
Remove bolts - arrows -.
-
Remove high-mount brake light - 1 - from body cut-out.
-
Unplug connector - 2 -.
Installing
Installation is reverse of removal, paying attention to the following:
‹› In case of defective LEDs, the complete high-mount brake light must be replaced.
Tightening Specifications