A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Release retainer tabs - arrow - and remove housing cover from headlamp housing.
-
Install new headlamp beam adjusting motor - 1 - with previous screws - 2 - on cover - 4 - from repair kit.
-
Connect electrical connector - 3 - with headlamp beam adjusting motor.
-
Start by inserting ball end of positioning stem from underneath in reflector socket. To do so, pull reflector to rear.
-
Fasten cover with headlamp beam adjusting motor to headlamp housing using screws - 5 - from repair kit.
-
Install headlamp.
Tightening Specifications