A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Headlamp Alignment Control Module: Service and Repair
HID Bi-Xenon Headlamps, From 11.04
HID Lamp Control Module
CAUTION!
‹› HIGH VOLTAGE!
‹› Always disconnect negative ( - ) battery terminal prior to working on parts of HID headlamp components marked with yellow "HIGH
VOLTAGE " warning symbols.
Removing
-
Remove headlamp.
-
Remove screws - arrows -.
-
Remove control module - 1 - from headlamp housing.
-
Disconnect adapter cable - 2 - for HID headlamp bulb at control module - 1 -.
Installing
Install in reverse order of removal, noting the following:
-
Check gasket between control module for HID headlamp bulb and headlamp housing.
-
Install headlamp.