A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Engine Oil: Removal and Replacement
Engine Oil, Draining, Replacing Filter
WARNING! Oil extraction not permitted with various engine types!
Note:
-
Perform oil change at operating temperature.
Special tools and workshop equipment required
-
Hazet tension band -2171-1- or Oil filter wrench -3417-
-
Oil extractor -VAG 1782-
-
Oil Drain Adapter -T 40057- (2.0 TFSI)
Note:
-
Observe waste disposal regulations!
3.2 FSI
Note:
-
Loosen the cap before draining / extracting, so that the engine oil can run out of the oil filter housing.
-
Remove coolant reservoir - 1- and lay aside.
-
Remove oil filter cover with -SW 36- -2-.
-
Clean sealing surfaces oil filter cover and at oil filter housing.
-
Replace oil filter insert.
Sealing ring on cap, replacing