A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Fuse Block: Service and Repair
4-Pin Relay Carrier
4-Pin Relay Carrier
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Battery/Service and Repair/Removal and Replacement/Battery.
-
Remove driver's storage compartment.
-
Remove bolts - 1 - of fuse panel - 2 -.
-
Remove fuse panel from central tube for instrument panel.
-
Remove nuts - arrows - and remove Vehicle Electrical System Control Module (J519) - item 1 - with wires connected.
-
Remove relay or control modules from 4-pin relay carrier.