A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Wheel Bearing: Removal and Replacement
Wheel Bearing Housing With Bolted Wheel Bearing, Servicing
Wheel Bearing Housing with Bolted Wheel Bearing, Servicing
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 401)
‹› Thrust Plate (VW 402)
‹› Punch (VW 407)
‹› Punch (VW 412)
‹› Thrust Pad (VW 511)
‹› Press Tube (30 - 100)
‹› Sleeve (VW 416 B)
‹› Sleeve (VW 519)
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› Separating Tool (Kukko 15-17)
Removing
-
Remove wheel trim cap, remove cover cap on light-alloy wheels (removal hook in vehicle tool kit).
=> [ Remove drive axle ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and
Replacement/Front Suspension
-
Remove drive axle hex bolts (only loosen if vehicle is standing on wheels risk of accident).
-
Remove wheel.
-
Secure brake disc with a wheel bolt.
-
Remove ABS speed sensor wiring from wheel bearing housing bracket.
Vehicles with brake caliper HP-2
-
Remove hex bolt - 2 - and remove brake line bracket.