A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Fuse Block: Service and Repair
Right Connector Station
Right Connector Station
Removing
‹› Location: Right connector station - arrow - is located in right footwell beneath A-pillar trim.
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
-
Remove A-pillar trim:.
-
Press retaining clip and detach connector point from A-pillar - arrow -.
-
Unclip fuse panel at connector point.
-
Remove relays or control modules and then unclip appropriate relay carrier.
‹› Refer to the applicable wiring diagram for exact identification of connections on connector station => Wiring Diagrams.
Installing
Install in reverse order of removal, noting the following:
-
Install A-pillar trim:.