A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Open Pliers For Fiber Optic Conductor (VAS 6223/1 ).
‹› Stripping lever must be in lower position - arrow -.
-
Place fiber optic cable - 1 - in stripping point.
‹› Fiber-optic cable must terminate flush to rear side of cutting pliers.
-
Close Pliers For Fiber Optic Conductor (VAS 6223/1 ) until stop and keep closed.
-
Lift up stripping lever - arrow -.
-
Open cutting tool and remove fiber optic cable - 1 -.
-
Detach separated section of insulation from fiber optic cable.
Precision cutting (production of optical end face)