A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Electronic Throttle Actuator: Service and Repair
Accelerator Pedal Module With Throttle Position Sensors
Accelerator Pedal Module with Throttle Position Sensors
Removing
-
Remove driver-side storage compartment.
-
Separate electrical connector - 2 -.
-
Remove bolts - 1 - and - 3 -.
-
Remove accelerator pedal module.
Installing
Installation is in reverse order of removal, note the following:
-
Install driver-side storage compartment.
Vehicles with automatic transmission:
If the throttle position sensor or engine control module are replaced in vehicles with automatic transmission, the kick-down function must be adapted.
Refer to => [ Kick-Down Function, Adapting after Replacing Accelerator Pedal Module or Engine Control Module ] See: Transmission Control
Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Downshift Switch/Testing and Inspection.
Tightening Specifications