A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Body Control Module: Service and Repair
Comfort System Central Control Module
Removing
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Functions" routine Vehicle diagnosis,
testing and information system VAS 5051.
-
Remove the lower A-pillar trim.
-
Remove driver's seat..
‹› Seat belt on seat frame must not be loosened.
-
Fold back floor carpet.
-
Release the driver side electronics box cover - arrows - and fold cover to the right.
-
Release retaining clips - arrows - and remove Comfort System Central Control Module (J393) - item 1 - from electronic box.
-
Disconnect electrical connectors - 2 to 6 -.
‹› Check the exact assignment for driver side electronics box in the current wiring diagram Wiring diagrams, Troubleshooting & Component
locations.
Installing
Install in reverse order of removal, observing the following: