A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Transmission Position Switch/Sensor: Service and Repair
09L, 6 Speed AWD A/T
Tiptronic switch F189, removing and installing - 09L, 6 Speed AWD A/T
^
Comprises 3 Hall sensors actuated by a magnet on the transverse slide of sliding cover.
^
Also check that magnet is properly secured on transverse slide of sliding cover, replace sliding cover with guide if necessary.
Removing
-
Remove selector mechanism cover.
-
Press 4 locking hooks - arrows - inward and pull cover - 2 - off guide - 1 -.
-
Take printed circuit with integrated Tiptronic switch F189 out of cover.
Note:
^
If necessary, the sliding cover with the magnet for the Tiptronic switch F189 can be removed as described below. However, as a replacement part
the sliding cover is only available together with the guide.
-
Carefully separate two halves of guide by levering them apart - arrows -.
-
Remove sliding cover with magnet for Tiptronic switch F189.
Installing
Installation is performed in reverse sequence. Note the following:
-
Install selector mechanism cover.
-
Install selector lever handle.