A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
3
Bolt
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
4
Bolts (Qty. 3)
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
5
Bolt
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
6
Bolt
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
7
Bolt
‹› Tightening specification 3.5 Nm
‹› Self-locking
‹› Quantity: 4
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
8
Side Curtain Airbag
9
Side Curtain Airbag Connector
‹› Removal: