A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Ensure connector - 9 - (USA) is engaged correctly.
-
Clip belt guide cover - 6 - in by tapping lightly with hand in direction of arrow - C -.
-
On vehicles with belt tensioners, belt wear detection must be checked. Refer to => [ Rear Three-Point Seat Belt with Belt Tensioner, Checking
Belt Fastening Detection ] See: Repairs and Inspections Required After a Collision/Service and Repair/Seat Belts, Inspecting.
‹› The belt relay - 4 - and belt webbing - 5 - must not touch or graze foam pieces or anchor pieces.
‹› Belt relay - 4 - must follow each belt webbing movement.
‹› Belt webbing - 5 - must move freely in all directions.