A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove rear bench seat. Refer to through October 2004 => [ Bench Seat, through October 2004 ] See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seats; from November 2004 => [ Bench Seat, from November 2004 ] See: Body and Frame/Seats/Service
and Repair/Removal and Replacement/Rear Seats.
-
Remove bolt - 4 - (Qty. 1).
‹› The sealing ring - 5 - must always be replaced.
‹› When installing, ensure safety belt latch and/or lap belt engages in rotating knobs.
‹› The narrow side of the safety belt latch and/or lap belt must face in direction of travel.
2
Lap Belt
3
Lap Belt with Retractor
4
Bolt
‹› Tightening specification 55 Nm
‹› Only use original bolt
5
Seal
‹› Must be replaced