A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
Fuel Level Sensor
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Safety Precautions/Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Clean Working Conditions/Fuel Supply System.
-
Remove fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump.
-
Release retaining tabs - arrows - with a screwdriver and pull the Fuel Level Sensor (G) upward and out.
CAUTION!
Before remove electrical connectors on Fuel Level Sensor (G), first release contact retaining tabs.
-
Disengage electrical connector retaining tabs - 1 - and - 2 - and disconnect them.
Installing
Installation is in reverse order of removal, note the following:
-
Connect the electrical connections - 1 - and - 2 - and check that they are securely engaged.