A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Disconnect electrical connectors - 1 - and - 3 -.
CAUTION!
The technician must discharge static electricity before disconnecting the electrical connector - 4 -, for example by touching the door striker
pin.
-
Disconnect electrical connector - 4 -.
-
Press catch - 1 - in - direction of arrow - until harness connector - 2 - disengages.
-
Carefully pull off steering column switch together with Steering Column Electronic Systems Control Module (J527).
Installing
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Insert top trim piece for steering column switch into catches of bottom trim piece, press together and bolt.
-
Install driver's storage compartment.
-
Install steering wheel.
-
Install airbag unit.
Tightening Specifications