A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Combination Switch: Service and Repair
Steering Column Electronic Systems Control Module
Steering Column Electronic Systems Control Module
-
If the control module was replaced, the select the control module in "Guided Functions"Vehicle diagnosis, testing and information system VAS
5051.
-
Remove Steering Column Switch Module (SCSM). Refer to => [ Steering Column Switch Module ] See: Steering Column Switch Module.
Removing
‹› Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.
-
Carefully release catches - arrows -.
-
Pull return spring with slip ring - 2 - with Steering Angle Sensor (G85) - item 1 - off from steering column switch module (SCSM).
-
Remove screws - arrows -.
-
Remove Steering Column Electronic Systems Control Module (J527) - item 1 - from steering column switch module.
Installing
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Install Steering Column Switch Module (SCSM).