A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Trunk Lamp Switch: Service and Repair
Rear Lid Contact Switch
Removing
-
Remove the rear lid lock.
-
Pry plastic catch - 3 - from retaining screws - 1 - using flat-head screwdriver.
-
Fold plastic catch as far rearward as possible.
-
First, pull contact switch - 2 - to side and then upward out of rear lid lock.
Installing
Install in reverse order of removal, observing the following:
‹› Make sure that washers between plastic catches and rear lid lock are seated properly.
-
Install the rear lid lock.