A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Fuse Block: Service and Repair
Fuse Holder
Fuse Holder
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Wiring Harness/Service Precautions/Vehicle Damage Warnings/Contact
Corrosion.
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Battery/Service
and Repair/Removal and Replacement/Battery.
-
Remove driver's storage compartment.
-
Remove bolts - 1 - of fuse panel - 2 -.
-
Remove fuse panel from central tube for instrument panel.
-
Unhook wiring harness on central tube for instrument panel and set aside.
-
Cut cable tie - 1 -.
-
Release cover for fuse panel - arrows -.
-
Remove fuses on fuse panel.
-
Remove retaining strip for the connectors - arrows - and remove the connectors from fuse panel.