A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Disengage connector catches - arrows - and disconnect harness connectors - 1 - and - 2 - from Engine Control Module (ECM).
-
If present, unclip Transmission Control Module (TCM) retaining bracket.
-
Release harness connector - arrow - and disconnect it from Transmission Control Module (TCM).
-
If present, cut through cable tie.
-
Pull off connectors - 2 - at rear of connector strip.
-
Unscrew wire connection - 1 -.