A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Relay Box: Service and Repair
Plenum Chamber E-Box Connection Point
Relay and Fuse Panels
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Battery/Description and Operation/Battery.
Plenum Chamber E-Box Connection Point
Removing
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Remove driver's storage compartment.
-
Unbolt the electrical cable at bottom of connection point, E-Box in plenum chamber.
-
Remove rubber seal for plenum chamber cover.
-
Remove plenum chamber cover - 1 - toward front - arrows -.
-
Use a screwdriver to pry off the two caps - 3 -.