A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-2603002.png)
-
If necessary, install single wire seal on repair wire => [ Single Wire Seals, Assembly ].
-
Shorten repair wire and vehicle-specific wiring harness single wire as needed using the Wire Stripper (VAS 1978/3).
-
Remove insulation from ends of repair wire and vehicle-specific single wire and crimp ends with crimping wires and a crimp connector => [ Wire,
0.25 mm with Individual Crimp Connector, Repairing ] See: Service and Repair/Removal and Replacement/Wiring Harnesses and Connectors or
=> [ Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing ] See: Service and Repair/Removal and Replacement/Wiring Harnesses
and Connectors.