A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Wiring Harness: Removal and Replacement
Primary Connector With Round Terminal Connector Systems
Primary Connector With Round Terminal Connector Systems
Procedure
NOTE: If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts.
-
Guide release tool (which fits terminal housing) into release channel on terminal housing as illustrated.
-
Grasp contact at wire and gently push into terminal housing - left arrow -.
NOTE: By pushing contact in direction of terminal housing, contact retaining tabs are lifted off the housing shoulder and can be released using
release tool.
-
At the same time, push release tool in direction of the terminal housing - right arrow - and pull the released contact out of the terminal housing.
-
Remove the release tool after removing the contact from the housing.