A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Ride Height Sensor: Service and Repair
Vehicle Level Sensor Individual
Vehicle Level Sensor Individual
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Torque Wrench (V.A.G 1410)
When removing and installing control arm, it is necessary to loosen Left Front Level Control System Sensor (G78) retaining clip.
‹› To install connecting link to Left Front Level Control System Sensor (G78) crank, use an open-end wrench with dimension - A - = 4 mm to avoid
damaging the seal.
-
Dimension - A - = 4mm
-
Mount wheel and tighten.
-
Left Front Level Control System Sensor (G78) connecting link retaining clip is secured at control arm between stops with a clamp.
When installing headlamp range control, ensure correct position of crank and connecting link to each other.
‹› Connecting link must face forward diagonally.
‹› Crank must face rearward.