A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove screws - arrows -.
-
Remove the Steering Column Electronics Systems Control Module (J527) - 2 - and Windshield Wiper/Washer Switch (E22) - 3 - from steering
column switch module.
-
Remove Cruise Control Switch (E45) - 1 - from steering column switch module.
-
Remove screw - 5 - and remove retaining clip - 4 -.
Installing
Further Install in reverse order of removal, noting the following:
-
Ensure all fasteners and electrical connectors are properly connected and locked into place.
-
Install steering column switch module.
Tightening Specifications