A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Steering Column Control Module: Service and Repair
Steering Column Switch Module Assembly Overview
Steering Column Switch Module
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
General Information
Steering column switch module (SCSM) is composed of return ring with slip ring, Steering Angle Sensor (G85), steering column switch (signal
switch, wiper switch, cruise control switch) and Steering Column Electronic Systems Control Module (J527).
Use tester (VAS5051) to check Steering Column Electronic Systems Control Module (J527).
Steering Column Switch Module Assembly Overview
1
Return spring with slip ring