A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Stabilizer Bushing: Service and Repair
Stabilizer bar bushings, replacing
Special tools, testers and auxiliary items required
^
Torque wrench VAG 1331
Removing
-
Remove bolts - 1 -.
-
Remove clamp - 2 - and rubber bushing - 3 -.
Installing
-
Rubber bushing must make contact with collar - arrow - on stabilizer bar.
-
Initially tighten bolts - 1 - hand-tight.
-
Lower vehicle onto its wheels and bounce suspension several times.
-
Tighten bolts - 1 -.