A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Tighten hex bolt - 3 -
-
Install ABS speed sensor.
-
On vehicles with headlamp range control, install vehicle level sensor link at control arm. Refer to => [ Vehicle Level Sensor in Vehicles with
Automatic Headlamp Vertical Aim Control ] See: Sensors and Switches - Suspension/Ride Height Sensor/Description and Operation/Front
Suspension.
-
Screw on cover plate and tighten.
-
Install brake disc and attach the brake caliper.
-
Mount wheel and tighten.
-
Tighten drive axle hex bolt (only with vehicle resting on wheels risk of accident) => [ Install drive axle ] See: Transmission and Drivetrain/Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front Suspension.
-
Perform an axle alignment. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.
Check front axle, alignment must take place on a VW/Audi recommended alignment stand.