A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Wheel Bearing: Removal and Replacement
Bolted Wheel Bearing Unit
Bolted Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 401)
‹› Thrust Plate (VW 402)
‹› Sleeve (VW 416 B)
‹› Punch (VW 412)
‹› Punch (VW 407)
‹› Sleeve (VW 519)
‹› Puller (3- Kukko 15-17)
‹› Engine/Transmission Jack (V.A.G 1383 A)
Removing
-
Drive axle, removing and installing. Refer to => [ Drive Axles ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Removal and Replacement/Rear Suspension/Drive Axles.
-
Remove securing bolts - 1 - from brake caliper.
-
Remove brake caliper and hang on body.
-
Remove disc brake.
-
Remove cap bolts - 1 - and - 2 -