A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1703002.png)
5
Bracket for ATF line
6
Bolt
‹› 5 Nm
7
Bolt
‹› 9 Nm
8
Bracket
9
ATF line
‹› Note allocation
‹› Tighten union nuts => [ Union nuts , 29 Nm ]
10
ATF line
‹› Note allocation
‹› Tighten union nuts => [ Union nuts , 29 Nm ]
11
ATF cooler
‹› Clean ATF cooler, refer to => [ ATF Cooling Lines and Cooler, Cleaning ] See: Transmission Cooler/Service and Repair/Procedures/09LA
Transmission
12
ATF line
‹› Note allocation
‹› Manually install it all the way into the ATF cooler and then tighten it
13
Bracket
14
ATF line
‹› Note allocation
‹› Manually install it all the way into the ATF cooler and then tighten it
15
Bolt
‹› 5 Nm
16
Bolt
‹› 5 Nm
17
Nut
‹› 5 Nm
18
Bracket for ATF line
19
Bolt
‹› 5 Nm
‹› Installed depending on the version
20
Bracket