A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1705002.png)
7
Nut - 5 Nm
‹› Mounting, ATF lines on the bracket
8
Nut - 5 Nm
‹› Mounting, bracket to the transmission
9
Union nut - 29 Nm
10
Union nut - 29 Nm
11
Connector coupling
12
Bolt, 5 Nm
‹› Mounting, ATF lines on the front end
13
Bolt, 5 Nm
‹› Before tightening bolt, push in line onto stop by hand
‹› Mounting, ATF line and bracket at the bottom on the cooler
14
ATF line
‹› Mounted in the cooler at the bottom
‹› Before tightening bolt, install the ATF lines onto stop by hand
15
O-Ring
‹› Replace
‹› Insert with ATF
16
Bolt, 5 Nm
‹› Upper ATF line mount on the cooler
‹› Before tightening bolt, push in line onto stop by hand
17
ATF line
‹› Mounted at the top in the cooler
‹› Before tightening bolt, install the ATF lines onto stop by hand
18
O-Ring
‹› Replace
‹› Insert with ATF
