A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1740001.png)
Seals and Gaskets: Service and Repair
09LA Transmission
Torque Converter Shaft Seal
Special tools, testers and auxiliary items required
‹› Extractor lever (VW 681)
‹› Thrust piece (T10137)
Procedure
-
Remove the transmission. Refer to: => [ Transmission, 2.0L TFSI ] , => [ Transmission, 3.2L FSI ] See: Service and Repair/Removal and
Replacement/Transmission, 3.2L FSI, => [ Transmission, 4.2L MPI ] See: Service and Repair/Removal and Replacement/Transmission, 4.2L MPI
.
-
Attach transmission to assembly stand. Refer to => [ Transmission, Securing to Assembly Stand ] See: Service and
Repair/Procedures/Transmission, Securing to Assembly Stand.
-
Carefully remove the torque converter.
-
Remove torque converter shaft seal with Extractor Lever (VW 681).
-
Apply ATF to circumference and sealing lips of oil seal.
‹› Installation position: The open side of the sealing ring faces the transmission.
-
Using Thrust Piece (T10137), drive in torque converter shaft seal as far as thrust piece stop.