A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove Shift Lock Solenoid (N110).
Installing
Install in reverse order, paying attention to the following:
-
Rotate ball head - 1 - to correct installation position.
-
Guide Shift Lock Solenoid (N110) diagonally from above into shift mechanism.
-
Tip Shift Lock Solenoid (N110) down in opposite direction of - arrow -.
-
Ball head - 1 - must be completely engaged in operating lever on shift mechanism.
-
Secure Shift Lock Solenoid (N110) with the retaining hook - A -.
-
Install selector mechanism cover - 1 -. Refer to => [ Selector Mechanism Cover ] See: Shifter A/T/Service and Repair/Removal and
Replacement/09LA Transmission/Selector Mechanism Cover.
-
Install selector lever handle. Refer to => [ Selector Lever Handle ] See: Shifter A/T/Service and Repair/Removal and Replacement/09LA
Transmission/Selector Lever Handle.
-
Check shift lock solenoid (N110) function. Refer to => [ Selector Mechanism, Checking ] See: Shifter A/T/Service and Repair/Procedures/09LA
Transmission