A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Clutch Disc: Removal and Replacement
Clutch With SAC Pressure Plate, Removing and Installing
Clutch with SAC pressure plate, removing and installing, 02X, 6-Speed Four-Wheel Drive M/T
Special tools, testers and auxiliary items required
^
Counterhold tool 10 - 201
^
Centering mandrel 3176
^
Grease for clutch plate splines G000100
Removing
-
Attach counter-hold tool 10 - 201 before loosening bolts.
To prevent the pressure plate from becoming warped during removal (causes clutch grab when driving off), always adhere to the following procedure
when unscrewing the pressure plate:
-
Loosen all six bolts consecutively in clockwise direction and in steps of 90° (1/4 turn) until pressure plate is released.
Installing
Note:
^
Before re-installing the SAC pressure plate, check that it is not warped.
^
When only the clutch plate is replaced, the adjuster ring in the SAC pressure plate has to be reset before assembly.