A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1846004.png)
happens, these areas must be cleaned thoroughly.
‹› When working in floor area, cover the carpet with a cloth to protect against any leaking brake fluid.
-
Clamp shut supply hose - A - to reservoir/brake fluid with Hose Clamps up to 25 mm Diameter. (3094), remove at clutch master cylinder and seal
off.
-
Remove rubber grommet over supply hose connecting pipe from cross panel.
-
Pry retaining clip - C - out with a screwdriver and then pull hose/line assembly - B - out a little.
-
Remove the bolt for brake fluid reservoir - 1 - and pull the connector for the Brake Fluid Level Sensor off downward.
‹› The brake fluid reservoir is not removed.
-
Remove the vacuum pipe to brake booster - 1 -.