A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Bring Installation Device into contact with joint by turning knurled thumb screws - 2 -.
‹› Joint must be secured without play in Assembly Device (T40018) or (T40084).
‹› Tighten screws - 2 - by hand only.
-
Screw Multi-Purpose Tool ( VW 771) into Assembly Device (T40018) or (T40084).
Drive axle AAR 3300 i Assembly Device (T40018) is shown in illustration.
Use Assembly Device (T40084) with drive axle AAR 2600 i.
-
Pull joint out horizontally with impact tool.
Leave joint in Assembly Device (T40018) or (T40084).
-
Mark installation position of parts 1 and 2 with lines.