A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1953001.png)
Constant Velocity Joint: Overhaul
Front Drive Axle With 108 mm Dia. Inner Constant Velocity Joint
Servicing inner constant velocity joint
Removing inner constant velocity joint
-
Clamp drive shaft in vise.
Use protective jaws.
-
Drive cover off with a copper or brass mandrel.
-
Remove circlip.
-
Remove drive shaft grease and mark installation position of constant velocity joint relative to drive shaft.
-
Clamp constant velocity joint with drive shaft in vise, as shown in illustration.
-
A second person must hold the drive shaft horizontal to prevent the constant velocity joint from being damaged.
-
Open out rim - arrow - of cap slightly using a small chisel.
-
Drive cap off with a copper or brass mandrel.