A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1942002.png)
-
Screw old drive axle bolt into joint as shown in the illustration.
-
Drive joint onto drive axle with plastic hammer until circlip engages.
-
Apply 40 g joint grease in boot side of joint.
Grease quantities, see table => [ Grease quantity and type ] See: Triple Roller Joint AAR 2000 Assembly Overview
-
Bleed protective joint boot.
-
Close clamp.