A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Wheel Bearing: Removal and Replacement
Wheel Bearing Housing
Wheel Bearing Housing
Special tools, testers and auxiliary items required
‹› Ball Joint Puller (T40010)
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
Removing
-
Remove wheel trim cap, remove cover cap on light-alloy wheels (removal hook in vehicle tool kit).
-
Remove drive axle bolt (loosen only when the vehicle is standing on its wheels risk of accident) => [ Remove drive axle ] See: Axle Shaft
Assembly/Service and Repair/Removal and Replacement/Front Suspension.
-
Remove ABS speed sensor wiring from wheel bearing housing bracket.
Vehicles with brake caliper HP-2
-
Remove hex bolt - 2 - and remove brake line bracket.
-
Remove bolts - 1 - for brake caliper and take off brake caliper.
-
Reinstall brake line holder. Install and tighten hex bolt - 2 -.
-
Secure brake caliper to body so that the weight of the brake caliper does not stress or damage the brake line.
Continuation for all vehicles
-
Remove brake caliper and secure to body so weight of caliper does not stress or damage brake hose or brake line.
-
Remove ABS speed sensor bolt - 5 -.