A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› Flex joint in front exhaust pipe must not be bent more than 10°, otherwise it may be damaged.
‹› The exhaust system with the 3.0L V6 gasoline engine is shown in the illustration.
-
Disengage rear part of exhaust system at retaining loops and remove.
‹› A second technician is needed to remove the rear section of the exhaust system.
-
Disconnect exhaust system at double clamp - arrow -.
-
Remove driveshaft heat shield - arrows -, if applicable.