A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
^
Driver T40109
^
Sealing grease G 052 128 A1
^
2 hex bolts M8 x 30
Removing
^
Rear final drive installed
Observe general repair notes.
-
Remove rear part of exhaust system from clamping sleeves - arrows -.
-
Disconnect driveshaft from rear final drive and tie up.
-
Place Engine/transmission jack VAG 1383 A with universal transmission support VAG 1359/2 under rear final drive.
-
Remove securing bolts from transmission support - arrows -.
-
Lower final drive carefully until flange/driveshaft is accessible.