A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Checking Ground (GND)
-
Using a Multimeter, check the Transmission Control Module (TCM) J217 electrical harness connector terminals 13 and 16 to Ground (GND) for
resistance.
Specified value: 1.5 Ohms
If the specification was not obtained:
-
Check the wiring for a an open circuit.
-
If necessary, repair the faulty wiring connection.
If no malfunction is found in the wiring:
-
Replace the Mechatronic unit in the transmission.
Final procedures
1. Check the DTC memory.
2. If necessary, erase DTC memory of the Transmission Control Module (TCM) J217.
3. Generate readiness code.