A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
^
Push assembly cartridge into guide sleeve.
^
Attach pressure fork VAS 5161/2 to catch part VAS 5161/6 and press assembly cartridge downward.
^
At same time turn knurled screw of assembly cartridge toward right until tips engage in valve keepers.
^
Slightly move knurled screw back and forth. This causes valve keepers to be pressed apart and taken into cartridge.
^
Release pressure fork.
^
Remove assembly cartridge with spacer ring, guide bushing, valve plate and valve spring.
Intake side:
^
Thread catch part VAS 5161/6 with insertion fork VAS 5161/4 onto a stud of cylinder head.
^
Push in guide bush VAS 5161/13 as far as it will go into lifter guide at valve to be removed.
-
Installation position: Shaded areas point across to driving direction.
^
Push distance ring VAS 5161/17 onto assembly cartridge VAS 5161/8.
^
Push assembly cartridge into guide sleeve.
^
Attach pressure fork VAS 5161/2 to catch part VAS 5161/6 and press assembly cartridge downward.
^
At same time turn knurled screw of assembly cartridge towards right until the tips engage in valve keepers.
^
Slightly move knurled screw back and forth. This causes valve keepers to be pressed apart and taken into cartridge.
^
Release pressure fork.
^
Remove cartridge with spacer ring, guide bushing, valve plate and valve spring.