A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
Wheel Bearing: Service and Repair
Wheel Bearing Housing, Removing and Installing
Wheel Bearing Housing, Removing and Installing
Removing
-
Remove wheel trim.
On light alloy wheels use puller in vehicle tool kit to remove trim cap.
-
Remove bolt for drive axle.
WARNING: The vehicle must be standing on it's wheels when loosening or tightening the bolt for the drive axle. Otherwise the risk of an
accident exists
-
Remove wheel and secure brake disc using wheel bolt.
-
Detach ABS wheel speed sensor wire from bracket on brake caliper.
-
Remove bolts -1- for brake caliper and remove caliper.
CAUTION:
-
Suspend the brake caliper using a piece of wire. Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and
damage the hose.
-
Do not loosen brake hoses or lines.
-
Remove brake disc.
-
Remove bolts -1- for brake splash guard.
-
Pull ABS wheel speed sensor out of wheel bearing housing.
-
Loosen nuts -2- and -3-.