A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-3167001.png)
Brake Intervention Sensor / Switch: Service and Repair
Brake Lamp Sensor
‹› After removing, the brake lamp sensor can be re-used.
‹› The brake light sensor programs itself. It is not necessary to calibrate it after installation.
Removing
-
Remove driver side storage compartment - 1 to 3 -.
-
Disconnect electrical connector to footwell vent - C -.
-
Remove footwell vents - A- and -B -.
-
Disconnect electrical connector to brake light sensor.